JVC KENWOOD Corporation 39923220 用户手册

23

Q  M

1 Press the key programmed as Autodial.

• The last called unit appears on the display.

• Press the PF 2 key to switch the display between the unit name and the list 

number.

2 Press and hold the PF 2 key to enter Store & Send mode.

3 Enter the desired digits using the DTMF keypad.

• Alternatively, you can select a digit by rotating the CH control, and then set the 

selected digits by pressing the GRP

 key.  Repeat this process to enter the 

entire number.

4 Press the PTT switch to make the call.

• Alternatively, you can press the PF 4 key to page the selected unit, rather than 

making a call.

Q S

1 Press the key programmed as Autodial.

• The last called unit appears on the display.

• Press the PF 2 key to switch the display between the unit name and the list 

number.

2 Rotate the CH control to select your desired list number.

3 Press the PTT switch to make the call.

• Alternatively, you can press the PF 4 key to page the selected unit, rather than 

making a call.

1 When a call is received, a ringing tone will sound and “PHONE CALL” will 

appear on the display.

2 Press and hold the PTT switch to speak, and release it to receive.

• Only one person can speak at a time.

1 Select your desired zone and channel.

2 Press the key programmed as Status to enter status mode.

3 Rotate the CH control to select the status ID you want to transmit.

4 Press the PTT switch or the PF 4 key to initiate the Status call.

• After the status call has been successfully received by the called unit, “COMPLETE” 

appears on the display.