JVC KENWOOD Corporation 407110 用户手册
29
ENHANCED COMMUNICATIONS 6
s
scanning while the CTCSS frequency ID scan is
active.
active.
s
scanning.
Note: Received signals are audible while scanning is in
progress.
progress.
CROSS TONE
Use this feature when using different uplink and
downlink tones to access a repeater. You can set a
transmission Tone frequency and reception CTCSS
frequency to different frequencies.
downlink tones to access a repeater. You can set a
transmission Tone frequency and reception CTCSS
frequency to different frequencies.
To set the transmission tone:
1 Press
[A/B (A=B)] to select VFO A or VFO B.
2 Select your desired transmission frequency.
3 Press
[FM/AM (FM-N)] to select FM.
4 Press
[AGC/T (SEL)] until “ ” appears.
5 Press and hold [AGC/T (SEL)], then turn the
MULTI/CH control to select your desired Tone
frequency.
frequency.
6 Press and hold [AGC/T (SEL)] or press [CLR] to
complete the setting.
To set the reception tone:
1 Press
[A/B (A=B)] to select the other VFO.
2 Select your desired reception frequency.
3 Press
[FM/AM (FM-N)] to select FM.
4 Press
[AGC/T (SEL)] until “
” appears.
5 Press and hold [AGC/T (SEL)], then turn the
MULTI/CH control to select your desired CTCSS
frequency.
frequency.
6 Press and hold [AGC/T (SEL)] or press [CLR] to
complete the setting.
To set the Cross tone:
1 Press
[SPLIT].
s
2 Press
[AGC/T (SEL)] until “
” appears.
Note: hen the cross tone function is ON, the Tone and CTCSS
frequency cannot be changed. To change the Tone or CTCSS
frequency, press [AGC/T (SEL)] to turn Tone or CTCSS ON,
then change the setting.
frequency cannot be changed. To change the Tone or CTCSS
frequency, press [AGC/T (SEL)] to turn Tone or CTCSS ON,
then change the setting.