JVC KENWOOD Corporation 407601 用户手册

6

Scan monitors for signals on the transceiver channels.  While scanning, the 

transceiver checks for a signal on each channel and only stops if a signal is 

present.
To start/stop scanning, press the key programmed as Scan On/Off.

•  “Sc” appears on the display during Scan.

•  When a signal is detected, Scan pauses at that channel.  The transceiver will remain on 

the busy channel until the signal is no longer present, at which time Scan resumes.

 Note:  To use Scan, there must be at least 2 channels added to the scanning sequence.

If a Priority channel has been programmed, the transceiver will automatically 

change to the Priority channel when a call is received on that channel, even if call 

is being received on a normal channel.

•  “P” appears on the display during Priority Scan.

During scan, you can temporarily remove specific channels from the scanning 

sequence by pressing the key programmed as Scan Delete/Add while Scan is 

paused at the undesired channel.  To temporarily remove a zone, press and hold 

Scan Delete/Add while Scan is paused at a channel in the undesired zone.

•  The channel/zone is no longer scanned. However, when scanning is ended and 

restarted, the Scan settings return to normal.

You can add and remove zones and/or channels to and from your scan list.
1  Select your desired zone and/or channel.
2  Press the key programmed as Scan Delete/Add to remove a channel or press 

and hold the key for approximately  second to remove a zone.

The Scan Revert channel is the channel selected when you press the PTT switch 

to transmit during scan.  Your dealer can program one of the following types of 

Scan Revert channels:

•  Selected:  The last channel selected before scan.

•  Selected + Talkback:  Same as “Selected”, plus you can respond to calls on the 

channel at which scan is paused.

•  Priority:  The Priority channel.

•  Priority + Talkback:  Same as “Priority”, plus you can respond to calls on the channel 

at which scan is paused.

•  Last Called + Selected:  The last channel on which you receive a call.