JVC KENWOOD Corporation 408000 用户手册
41
■
Programming Priority Channels
1 Press [VFO].
2 Rotate the Selector (or press [UP]/ [DOWN]) to select your
2 Rotate the Selector (or press [UP]/ [DOWN]) to select your
desired Priority Channel frequency.
3 Select selective call functions, if necessary.
4 Press [F], [MR].
4 Press [F], [MR].
• The memory channel number appears and blinks.
5 Rotate the Selector (or press [UP]/ [DOWN]) to select “Pr”.
6 Press [MR] to store the data on the Priority Channel.
■
Using Priority Scan
1 Press [F], [6] to turn the Priority Scan ON or OFF.
• The “
” icon appears when the Priority Scan is ON.
Note:
◆
◆
If a signal is received on a Priority Channel with a CTCSS or
DCS code programmed, the Priority Channel is recalled only
when the programmed tone/ code matches.
◆
Press and hold
[MON] to pause Priority Scan when the
transceiver is not displaying the Priority Channel. Release
[MON] to resume Priority Scan.
◆
If you clear the Priority Channels, Priority Scan stops.
◆
You can also press any key other than
[ ], [MON], [F] then
[MON] (Squelch lrvel adjustment), [F] then [MENU] (Key lock)
and
[PTT] to exit Priority Scan while
“
PRI” is blinking.