JVC KENWOOD Corporation 408000 用户手册
54
AUXILIARY FUNCTIONS
apo (a
uTo
p
ower
o
FF
)
The transceiver switches OFF automatically if no keys or controls
are pressed or adjusted for 30 minutes (default). One minute before
the transceiver switches OFF, warning beeps sound for a few
seconds and “APO” blinks. You can select the APO time from OFF
(disable), 30 (default), 60, 90, 120, or 180 minutes.
1 Enter Menu mode and access Menu No. 8 (APO).
2 Press [MENU] and rotate the Selector (or press [UP]/ [DOWN])
1 Enter Menu mode and access Menu No. 8 (APO).
2 Press [MENU] and rotate the Selector (or press [UP]/ [DOWN])
to select the APO time.
3 Press [MENU] to store the setting.
Note:
◆
◆
APO does not function while the transceiver is scanning.
◆
The APO timer starts counting down the time when no key presses,
no control adjustments.
◆
The APO warning beep sounds and “APO” appears 1 minute
before the transceiver turns OFF.
◆
The APO warning beep sounds even if Menu No. 16 (BP) is set to
“OFF”.
r
eMaining
B
aTTery
c
apaciTy
You can confirm the remaining battery capacity when you transmit
in low power.
To check the remaining capacity:
1 Press and hold [PTT].
To check the remaining capacity:
1 Press and hold [PTT].
• The bar-graph shows the remaining battery capacity.