JVC KENWOOD Corporation 408000 用户手册
57
B
eep
F
uncTion
The Beep function provides confirmation of entry, error status,
and malfunctions of the transceiver. We recommend you leave
this function ON in order to detect erroneous operations and
malfunctions.
However, to turn the beep function OFF:
1 Enter Menu mode and access Menu No. 16 (BP).
2 Press [MENU] and rotate the Selector (or press [UP]/ [DOWN])
However, to turn the beep function OFF:
1 Enter Menu mode and access Menu No. 16 (BP).
2 Press [MENU] and rotate the Selector (or press [UP]/ [DOWN])
to select “OFF”.
3 Press [MENU] to store the setting.
The transceiver generates the following warning beeps even if the
The transceiver generates the following warning beeps even if the
beep function is turned OFF.
• APO warning beeps
• Time-Out Timer warning beep
• APO warning beeps
• Time-Out Timer warning beep
Note: The beep output level is linked to the volume control position.
B
usy
c
Hannel
l
ockouT
This function is used in order to prevent transmitting on a channel
or frequency that somebody else is currently using. When turned
ON, an error beep sounds and you cannot transmit even if you
press
[PTT].
1 Enter Menu mode and access Menu No. 13 (BCL).
2 Press [MENU] and rotate the Selector (or press [UP]/ [DOWN])
2 Press [MENU] and rotate the Selector (or press [UP]/ [DOWN])
to select “ON” .
3 Press [MENU] to store the setting.