JVC KENWOOD Corporation 408000 用户手册
65
3 Press [MENU] to store the setting.
• “TX INH” appears and an error beep sounds if the transceiver
tries to transmit while TX Inhibit is ON.
e
Mergency
s
iren
Press and hold the
[0] key for at least 1.5 seconds to emit the siren
from the speaker at the selected volume level.
To set the Emergency siren volume level:
1 Enter Menu mode and access Menu No. 11 (EMG).
2 Press [MENU] and rotate the Selector (or press [UP]/ [DOWN])
To set the Emergency siren volume level:
1 Enter Menu mode and access Menu No. 11 (EMG).
2 Press [MENU] and rotate the Selector (or press [UP]/ [DOWN])
to select “OFF”, “VOL”, “MED” or “MAX”.
OFF: The Emergency siren does not sound.
VOL: The Emergency siren sounds at the same level as the
current volume setting.
MED: The Emergency siren sounds using volume level 20, no
matter what the current volume level setting is.
MAX: The Emergency siren sounds using volume level 31, no
matter what the current volume level setting is.
3 Press [MENU] to store the setting.
■
Using the Emergency Siren
1 Press [0](1.5s), to turn the Emergency siren ON.
• “EMG” appears.
2 Press [0](1.5s) , [PTT] or power OFF, to turn the Emergency
siren OFF.