JVC KENWOOD Corporation 433200 用户手册

KPG-22U/ 36U/ 43U/ 46U

USB PROGRAMMING INTERFACE CABLE

INSTALLATION MANUAL

© B62-2326-00 (M)

•  USB adapter (USB 2.0 compliant)
•  CD (with driver software)
•  Installation Manual

Operating System:

Windows 2000/ Windows XP/ Windows Vista/ Windows 7

ATTENTION:  When installing the KPG-22U/ 36U/ 43U/ 46U for 

the first time, install the supplied KPG-22U/ 36U/ 43U/ 46U driver.

1  With the computer power on, insert the supplied CD into your 

CD-ROM drive.  Double-click the [

2K3_Vista_7.exe] file.  When the Installation Wizard begins, 

click [

Next>]].

2  Read through the licensing agreement, check the “I accept 

the terms of the license agreement” box, then click [

Next>].

3  Select the desired folder to copy the driver file to your 

computer, then click [

Next>].

4  Begin the installation by clicking [Install].
5  When the driver finishes copying to the computer, click the 

[Launch the CP210xVCP Driver Installer] box, then click 

[Finish].

6  The drivers are installed sequentially.  Select the desired 

folder to copy the driver file to your computer, then click 

[Install].

7  A [Reboot Now?] dialog box appears when the files have 

finished copying to the computer. Click [

Yes] to complete the 

installation.

Note: 
♦

   The KPG-22U/ 36U/ 43U/ 46U is installed as a virtual port 

driver.

♦

   The KPG-22U/ 36U/ 43U/ 46U does not support programs 

other than those used for Kenwood transceivers.

♦

   If the driver cannot be installed or if, having installed the driver 

and restarting your computer, the driver cannot be found or 

the operation does not stabilize, try changing the USB port 

to which you have connected the KPG-22U/ 36U/ 43U/ 46U.  

Additionally, try removing other equipment attached to the 

computer USB ports.

♦

   Please access the following URL for the driver download 

information:   

Connect the KPG-22U/ 36U/ 43U/ 46U to a USB port. In 

the “

Device Manager”, open the “Port (COM and LPT)”.  

If “

Silicon Labs CP210x USB to UART Bridge (COMx)” 

appears, installation is complete.

In the “Program Installation and Deletion” screen, uninstall the 

following items:

•   Windows

®

 and Windows Vista

®

 are registered trademark 

of Microsoft Corporation in the United States and/or other 

countries.

•   Other product and company names mentioned herein may 

be the trademarks of their respective owners.

This device complies with Part 15 of the FCC Rules. Operation is subject 

to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.
One or more of the following statements may be applicable to this 

equipment.

This equipment generates or uses radio frequency energy.  Changes or 

modifications to this equipment may cause harmful interference unless 

the modifications are expressly approved in the instruction manual.  The 

user could lose the authority to operate this equipment if an unauthorized 

change or modification is made.

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation.
This equipment generates, uses and can generate radio frequency energy 

and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications.  However, there is 

no guarantee that the interference will not occur in a particular installation.  

If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one or more of 

the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment to an outlet on a circuit different from that to 

which the receiver is connected.

•  Consult the dealer for technical assistance.

Products and batteries with the symbol (crossed-out wheeled bin) 

cannot be disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled 

at a facility capable of handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility 

nearest to you.
Proper recycling and waste disposal will help conserve resources whilst 

preventing detrimental effects on our health and the environment.

Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda 

Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun 

olarak üretilmiştir. 
This product complies with Directive, Number 26891 regarding "REGULATION ON 

THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN 

ELECTRICAL AND ELECTRONIC EQUIPMENT".

Kenwood Electronics Europe B.V.

Amsterdamseweg 37, 1422 AC Uithoorn, The Netherlands
Manufacturer:

Kenwood Corporation

1-16-2 Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-

8525 Japan