JVC KENWOOD Corporation 458300 用户手册

6

Press 

 to switch the transceiver ON.

• 

A beep sounds and the display illuminates.

• 

If the Transceiver Password function is programmed, “PASSWORD” will appear on the 
display.

Press 

 again to switch the transceiver OFF.

■ Transceiver Password

 

To enter the password:

1 Press 

the  /  key to select a digit.

• 

When using a microphone DTMF keypad, simply enter the password digits and 
proceed to step 4.

2 Press 

the 

S or   key to accept the entry and move to the next digit.

•   Press the A or # key to delete an incorrect digit.

•   Press the C> key to delete all.

3   Repeat steps 1 and 2 to enter the entire password.

•   The password can contain a maximum of 6 digits.

4   Press the S or   key to confi rm the entered password.

•   If you enter an incorrect password, an error tone sounds and the transceiver 

remains locked.

Press the [Volume Up] key to increase the volume.  Press the [Volume Down] key to 
decrease the volume.

If Squelch Off has been programmed onto a key, you can use that function to listen to 
background noise while adjusting the volume level.

Select the desired zone and channel/group ID using the keys programmed as [Zone Up]/ 
[Zone Down] and [CH/GID Up]/ [CH/GID Down].

• 

You can program names for zones and channels/group IDs with up to 10 characters.

• 

If the Voice Announce function has been set up by your dealer, an audio voice will 
announce the new zone, channel and group number when changing the zone, channel, 
and/or group. 

1  Select the desired zone and channel/group ID.

2  Press the key programmed as [Monitor] or [Squelch Off] to check whether or not the 

channel is free.