Wi Lan Inc EB03 用户手册
Configuration
58
AWE 120-24 Installation & Configuration Guide
Setting the RF Transmit Status
This setting can block a unit (or link) from carrying data traffic. It is used to disable units and to discontinue
service to customers if necessary.
service to customers if necessary.
➧
To set RF transmit status
1.
From the Main Menu, select RF Station Configuration and press
Enter
. The RF Station
Configuration menu is displayed.
2.
Select RF Transmit Status and press
Enter
. The data field highlights.
3.
Select a setting.
4.
Press
Enter
.
5.
Press
Esc
to exit to the Main Menu.
unblocked
Unit passes data in both directions(default setting)
blocked
Will not pass data in either direction
RF Station Configuration
Operating Mode Normal Mode
RF Transmit Status -> unblocked
Link Monitor Period (0=OFF, 1-10000) 0
Test Mode Timer Minutes (1-1000) 5
Base Station Only Parameters
Maximum Remote Distance 5 Km
Link Monitor Remote Station Rank 1
Remote Station Only Parameters
Throttle Enable off
Throttle Level (1-100) 10 (640 kps)
Link Monitor/Output Power Dynamic Output Power
User Output Power Adjust Ceiling -5 dB
Signal Margin (6-31) dB 6
Current Output Power Level Adjust -21