Radicom Research Inc RW8300 用户手册
`
RW8300 (USB) Designer’s Guide Draft v.037 (04-20-17)
56
FCC, IC, and CE Label Location and Module Model
Identification
The RW8300 module family is FCC Part 15 and IC (Industry Canada) certified. The RW8300 is
also CE marked. The modules are labeled with the appropriate RW8300 module model number
and FCC Part 15 ID, IC registration number and CE mark. The label can be found on top of the
metal shielding on the RW8300 Module.
also CE marked. The modules are labeled with the appropriate RW8300 module model number
and FCC Part 15 ID, IC registration number and CE mark. The label can be found on top of the
metal shielding on the RW8300 Module.
Important Regulatory Compliance and User Information
The final product with the modules installed needs to be tested for FCC Part 15, IC
(Industry Canada) CE, EMI/RFI compliance. Radicom certification documentation will
help streamline the final product approval process. Contact Radicom for more
information. To maintain compliance in the finished product, carefully follow guidelines
in this section.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users. For laptop installations, the antenna must be installed to ensure that
the proper spacing is maintained in the event the users places the device in their lap
during use.
the proper spacing is maintained in the event the users places the device in their lap
during use.
2) The transmitter module may not be co-located with any other transmitter or
antenna. As long as the two conditions above are met, further transmitter testing will not
be required. However, the OEM integrator is still responsible for testing their end product
for any additional compliance requirements required with the module installed (for
example, digital device emissions, PC peripheral requirements, etc).
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID can not be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating
be required. However, the OEM integrator is still responsible for testing their end product
for any additional compliance requirements required with the module installed (for
example, digital device emissions, PC peripheral requirements, etc).
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID can not be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating