Radicom Research Inc RW8300E 用户手册
`
RW8300 (USB) Designer’s Guide Draft v.037 (04-20-17)
10
RW8300 (USB) General Information
WiFi Ratings @ 25° C
Parameter
Min
Typical
Max
Units
Operating Temperature RW8300
25
C°
Relative Humidity (non-condensing) 5
95
炴
USB Voltage Requirement
VDC
Current Consumption when WiFi_ON
370
mA
Current Consumption when WiFi_OFF and
LAN connected
LAN connected
206
mA
Current Consumption when WiFi_OFF and
LAN disconnected
LAN disconnected
173
mA
Storage and transportation condition, in
range of °C and % R.H.
range of °C and % R.H.
Operating temperature, humidity and
atmospheric pressure range
atmospheric pressure range
Highest operation altitude
IP Classification protection against harmful
ingress of water and particulate matter.
Ingress Protection Rating 21
ingress of water and particulate matter.
Ingress Protection Rating 21
Expected service life
BLE single mode Ratings @ 25° C
ġ
Minimum
Typical
Maximum
Unit
Operation voltage
2.35
3.3
3.6
V
Output Power
4.0
dBm
Sensitivity
-92.5
dBm
Current Consumption *
Dormant mode
600
nA
Deep Sleep mode
5
uA
Idle mode
1.91
mA
RX/TX active
2.24
mA
* The Current Consumption is code dependent. Bluetooth functions and characteristics will vary depending on
the application firmware that is loaded into the RW8300xx-xx-B1-x module. The standard code is for BLE data
applications and Deep Sleep or Dormant mode is not available. Using any I/O (output) will draw more current
and change the overall current consumption.
the application firmware that is loaded into the RW8300xx-xx-B1-x module. The standard code is for BLE data
applications and Deep Sleep or Dormant mode is not available. Using any I/O (output) will draw more current
and change the overall current consumption.