RELM WIRELESS CORP. - BK RADIO DPHX51 用户手册
38 BK Radio
8. Turn on the clone and set it to the desired
channel group.
9. Press the [*] key on the master radio
keypad. The display will flash PROG
signifying that the radio is ready to
download its program to the clone.
signifying that the radio is ready to
download its program to the clone.
10. Press the [FCN] key on the master radio
keypad. The program in the master will
then be downloaded to the clone.
then be downloaded to the clone.
11. If the download was successful, the
display on the master will resume flashing
PROG.
PROG.
• To clone another channel group, turn
off both radios and go back to Step 3
on the previous page, changing the
channel group as required.
on the previous page, changing the
channel group as required.
•
If cloning is finished, turn off the clone
and disconnect the cloning cable.
Normal radio operation will occur
when you turn on the clone.
and disconnect the cloning cable.
Normal radio operation will occur
when you turn on the clone.
12. If the download was not successful, the
master will display FAIL and multiple
beeps will follow. Failure of downloading
can be due to:
beeps will follow. Failure of downloading
can be due to:
• Improper
connection
•
Failure to turn on the clone
• Setting the clone in Programming
Mode
•
Group ‘locked’ by PC Programming
NOTE: To stop the FAIL Mode, press
[CLR], turn off both radios, and
try again, starting with Step 1 on
the previous page.
try again, starting with Step 1 on
the previous page.
PRG
FAIL
PRG
PROG
1
2
3
4
5
6
7
8
9
0
*
#
CLR
FCN
PRI
ENT
1
2
3
4
5
6
7
8
9
0
*
#
CLR
FCN
PRI
ENT
DPH Owner’s Manual 7
RF EXPOSURE COMPLIANCE AND CONTROL GUIDELINES
AND OPERATING INSTRUCTIONS
AND OPERATING INSTRUCTIONS
To control your exposure and ensure compliance with the
occupational/controlled environment exposure limits always adhere to
the following procedures.
occupational/controlled environment exposure limits always adhere to
the following procedures.
Guidelines:
•
Do not remove the RF Exposure Label from the device.
•
User awareness instructions must accompany device when
transferred to other users.
•
Do not use this device if the operational requirements described
herein are not met.
Operating Instructions:
•
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the Push-To-Talk (PTT) button. To receive calls,
release the PTT button. Transmitting 50% of the time, or less, is
important because this radio generates measurable RF energy
exposure only when transmitting (in terms of measuring for standards
compliance).
transmit (talk), push the Push-To-Talk (PTT) button. To receive calls,
release the PTT button. Transmitting 50% of the time, or less, is
important because this radio generates measurable RF energy
exposure only when transmitting (in terms of measuring for standards
compliance).
•
Hold the radio in a vertical position in front of face with the
microphone (and the other parts of the radio, including the antenna)
at least one inch (2.5 cm) away from the nose. Keeping the radio at
the proper distance is important because RF exposures decrease
with distance from the antenna. Antenna should be kept away from
eyes.
microphone (and the other parts of the radio, including the antenna)
at least one inch (2.5 cm) away from the nose. Keeping the radio at
the proper distance is important because RF exposures decrease
with distance from the antenna. Antenna should be kept away from
eyes.
•
When worn on the body, always place the radio in a BK Radio
approved clip, holder, holster, case, or body harness for this product.
Using approved body-worn accessories is important because the use
of BK Radio or other manufacturer’s non-approved accessories may
result in exposure levels which exceed the FCC’s
occupational/controlled environment RF exposure limits.
approved clip, holder, holster, case, or body harness for this product.
Using approved body-worn accessories is important because the use
of BK Radio or other manufacturer’s non-approved accessories may
result in exposure levels which exceed the FCC’s
occupational/controlled environment RF exposure limits.
•
If you are not using a body-worn accessory and are not using the
radio in the intended use position in front of the face, then ensure the
antenna and the radio are kept at least one inch (2.5 cm) from the
body when transmitting. Keeping the radio at the proper distance is
important because RF exposures decrease with increasing distance
from the antenna.
radio in the intended use position in front of the face, then ensure the
antenna and the radio are kept at least one inch (2.5 cm) from the
body when transmitting. Keeping the radio at the proper distance is
important because RF exposures decrease with increasing distance
from the antenna.
•
Use only BK Radio approved supplied or replacement antennas,
batteries, and accessories. Use of non-BK Radio approved
antennas, batteries, and accessories may exceed the FCC RF
exposure guidelines.
batteries, and accessories. Use of non-BK Radio approved
antennas, batteries, and accessories may exceed the FCC RF
exposure guidelines.
•
For a list of BK Radio approved accessories visit the following
website : http://www.relm.com.
website : http://www.relm.com.
CONTACT INFORMATION
For additional information on exposure requirements or other
information, visit website http://www.relm.com.
information, visit website http://www.relm.com.