CALAMP WIRELESS NETWORKS INC. BDP3-CRE700 用户手册
120 20194-102
Paragon3 – 700/800MHz User Manual
28
4.7.3.3 Setup
(Advanced)
► Roaming
The “Host Link Active” feature allows a base to assure the communication backhaul is operating. If not,
the base indicates to mobiles on the channel that they should promptly roam to another base
the base indicates to mobiles on the channel that they should promptly roam to another base
The “Base Loaded” feature monitors the amount of network traffic during the previous 10-second period.
If there are more than a certain number of mobiles actively sending data and the channel is occupied
above a certain percentage, then the base indicates that a portion of the registered mobiles should roam to
other bases, until channel loading falls below the thresholds.
If there are more than a certain number of mobiles actively sending data and the channel is occupied
above a certain percentage, then the base indicates that a portion of the registered mobiles should roam to
other bases, until channel loading falls below the thresholds.
Figure 27 - Advanced IP Configuration – Roaming
Host Link Active (on ETH1)
Link check is…
Disabled (Default), Enabled
Host address
IP address of a router/host to be pinged periodically
Ping failure threshold
This many failed pings in a row are needed to mark the “Host is…” field as “Unreachable”
Ping success threshold
This many successful pings in a row are needed to mark the “Host is…” field as” Reachable”
Ping every
How often to send a ping
Host is …
Current status of the host link (blank if disabled)
Base Loaded
Feature is…
Disabled, Enabled
Mobile Limit
Minimum number of active mobile before channel can be considered “Loaded”
Percentage Threshold
Minimum percentage of data capacity before channel can be considered “Loaded”
Base is…
Current status of the base (blank if disabled)