Pony Electric Corporation 8TQMT-300 用户手册

17 

 

4. Use the Selector to set proper MMSI data for the digit shown. After 

correct verification of the first digit of the MMSI number, touch the 

 key to advance. The small digit now displays the 2nd character 

position with a 

 as the big digit and 

 as the small digit. Set the 

second MMSI digit using Selector and touch the 

 key to store. Re-

peat the operation until all 9 digits have been entered. Double-check 

your MMSI entry, toggling through each individual digit by pressing 

the 

 key. There is no backup or edit mode, so if you make a mistake 

entering the number, you'll have to start over. Press the 

 key to exit 

or just turn off the radio. After you are satisfied with the new MMSI 

number, press the call key. 
5. Press the 

 key and the radio will transmit the request. If there 

is no acknowledgement 

 after 4 seconds, the radio transmits the 

call again. The radio will stay in standby mode, indicated by the flash-

ing ID Annunciator, until an 

 is received. If an 

 is not received, 

you can press the call key again and the call is placed again. You can 

exit the call function at any time by pressing the 

 key twice. 

To place a non-DSC call: 
When making a non-DSC call, you'll have to switch to a communication 

channel after making initial contact, so be sure to select a channel au-

thorized for the type of communication you desire.