VTech Telecommunications Ltd 80-5587-00 用户手册

8

The wall mount bracket is designed for use on standard wall mount plates only.
1.

Run the power and telephone line cords through the slots in the bracket,
connecting them to the jacks located on the underside of the base.

2.

Plug the AC adapter into an electrical outlet. If the battery has not been
previously charged, place the handset in the base or charger, and allow it to
charge for 10-12 hours (or overnight).

3.

Connect the telephone line cord to the wall jack.

After the batteries are charged, pick up the handset and press phone/flash, you
should hear a dial tone.

If you subscribe to Caller ID service, the date and time will be set automatically
with the first incoming call. If you do not have Caller ID service, you can set the
date and time manually.

•    Press prog, and then press     or    until  DATE/TIME is displayed. Press

select.

•    The month is flashing. Press     or     until the screen displays the correct

month. Press select.

•    The day is flashing. Press     or     until the screen displays the correct day.

Press select.

•    The hour is flashing. Press     or     until the screen displays the correct hour.

Press select.

•    The minute is flashing. Press     or     until the screen displays the correct

minute. Press select.

•    AM or PM is flashing. Press     or     to choose AM or PM. Press select.

4.    Line up the tabs on

the wall mount
bracket with the slots
on the bottom of the
base unit. Snap the
bracket firmly in
place.

5.

Mount the base on
the wall. Position the
base unit so the
mounting studs will fit
into the holes on the
wall mount bracket.
Slide the base unit
down on the mount-
ing studs until it locks
into place.