VTech Telecommunications Ltd 80-6684-01 用户手册

25

Handset settings

Handset settings

If you dial seven digits to make a local call (no 
area code required), program your area code 
into the telephone as the home area code. After 
setting, if you receive a call from within your 
home area code, the caller ID history will only 
display the seven digits of the telephone number.

1. Press MENU/

 in the idle mode to enter 

the handset main menu.

2. Use

 CID to scroll to

>

HOME AREA CODE, then press 

/SELECT.

3. Press the dial pad keys to enter a three-digit 

home area code. Press DELETE/

 to delete 

digit while entering. 

4. Press 

/SELECT to save and return to the 

main menu.

NOTE: If, in the future, your telephone service provider 
requires you to dial 10 digits to make a local call (area 
code + phone number), re-program the home area code 
by following the steps above. With the home area code 
displayed, press and hold DELETE/

 to remove the 

contents. The home area code will now be restored to its 
default setting of _ _ _.

Press  OFF/

 or 

/MUTE while the 

telephone is ringing to silence the ringer temporarily. 
This will silence the ringer without disconnecting the 
call. The next incoming call will ring normally at the 
preset volume.

NOTE: Each handset will ring when there is an incoming 
call unless the ringer volume is turned off. Pressing 

 or 

/MUTE on one handset will only 

silence the ringer of that particular handset.

>

DIRECTORY
CALL LOG

>

HOME AREA CODE
DIRECTORY

HOME AREA CODE

___