VTech Telecommunications Ltd 80-8587-00 用户手册
9
To mount the console on the wall:
Lift the kickstand to detach it from the console, then snap it into the
outermost groove until it locks into place.
outermost groove until it locks into place.
2.
Install the wall mount bracket to the console as shown below. Insert the
upper tabs of the mounting bracket into the upper slots of the console.
Press the lower tabs of the mounting bracket into the lower slots of the
console until they lock into place.
upper tabs of the mounting bracket into the upper slots of the console.
Press the lower tabs of the mounting bracket into the lower slots of the
console until they lock into place.
3.
Unplug the power adapter from the power outlet. Unplug the telephone
line cords from the wall jacks (or DSL filters). Unplug the Ethernet cable
from the router.
line cords from the wall jacks (or DSL filters). Unplug the Ethernet cable
from the router.
Put the corded handset aside. Use a coin to rotate the handset tab 180
degrees. The protruding edge holds the corded handset when the phone is
mounted on the wall.
degrees. The protruding edge holds the corded handset when the phone is
mounted on the wall.
1.
2.
Protruding edge
Handset tab
Getting started
Wall mount installation