VTech Telecommunications Ltd 80-8587-00 用户手册
13
Getting started
Adding and registering a cordless handset
You can add a new handset (MS2025, purchased separately) to your telephone
system, but it must be registered with the MS2085 main console before use.
When first purchased, the expansion handset shows Choose Handset in
Registration at base menu. And put handset on cradle to register.
system, but it must be registered with the MS2085 main console before use.
When first purchased, the expansion handset shows Choose Handset in
Registration at base menu. And put handset on cradle to register.
If the handset does not have enough power to proceed with the registration,
you need to charge the new handset for at least five minutes (see Battery
installation and charging in the cordless handset manual). Start registration
when the handset screen shows Choose Handset in Registration at base menu.
And put handset on cradle to register.
you need to charge the new handset for at least five minutes (see Battery
installation and charging in the cordless handset manual). Start registration
when the handset screen shows Choose Handset in Registration at base menu.
And put handset on cradle to register.
To register a cordless handset to your MS2085 main console
Make sure the cordless handset is out of the
charger and the screen shows Choose Handset in
Registration at base menu. And put handset on
cradle to register.
charger and the screen shows Choose Handset in
Registration at base menu. And put handset on
cradle to register.
On the MS2085 main console, press MENU
/SELECT.
Scroll down to Registration and press
MENU/
SELECT.
Press
MENU/
SELECT again to select Handset. The
MS2085 main console screen shows Registering
handset... (Put handset on cradle to start).
Place the unregistered cordless handset into the
charger. The handset beeps once and begins
registering to the MS2085 main console. It takes up
to
handset... (Put handset on cradle to start).
Place the unregistered cordless handset into the
charger. The handset beeps once and begins
registering to the MS2085 main console. It takes up
to
60 seconds
to complete the registration. There
is a beep sound when the registration is successful.
The MS2085 main console shows Handset registered
and then the handset shows Handset X (Handset X
represents the handset name).
The MS2085 main console shows Handset registered
and then the handset shows Handset X (Handset X
represents the handset name).
NOTES:
If the registration is not successful, the MS2085 main console screen
displays Registration failed with an error tone. To reset the
handset, remove the handset from the cradle. Try the registration
process again.
displays Registration failed with an error tone. To reset the
handset, remove the handset from the cradle. Try the registration
process again.
Make sure to remove all unregistered system handsets or cordless
headset from the cradles before registering a new handset.
headset from the cradles before registering a new handset.
1.
2.
3.
4.
5.
1.
2.
System Setup
Ringers
Set Date/time
One Touch
Phone Settings
>Registration
Customer Support
L1
L2
L3
L4
Registration
>Handset
DECT Headset
L1
L2
L3
L4
Registering
handset...
(Put handset on
cradle to start)
L1
L2
L3
L4