VTech Telecommunications Ltd 80-9090-00 用户手册
25
Bluetooth
Bluetooth setup
Auto connection
When an active device moves within Bluetooth range of the telephone base,
or is turned on within range, the telephone base tries to connect to the device.
When the device moves out of range, it is disconnected. Your device might
make a connect or disconnect sound.
or is turned on within range, the telephone base tries to connect to the device.
When the device moves out of range, it is disconnected. Your device might
make a connect or disconnect sound.
A
connected device could also be disconnected by:
Turning off the Bluetooth device.
Turning off the Bluetooth feature of the device.
D
isconnecting through the telephone base Device list. If you disconnect
through the Device list, the telephone base will not attempt to reconnect
until your device is moved out of range and then moves back in range
again.
until your device is moved out of range and then moves back in range
again.
Bluetooth connection from idle mode
When you have active devices that are not connected,
CONNECT
appears
on the telephone base in idle mode. Press
CONNECT
on the telephone base
to start connecting an active device. When there are two active devices, the
screen will prompt you to choose one before connection
screen will prompt you to choose one before connection
Device list and connection
Up to 4 devices can be paired to the telephone base. All paired devices are
shown on the device list. To use a paired device, it must be in an active slot (A:
or B:) on the device list and connected. Two Bluetooth cell phones can be on
a call at a time. While you are on a cell line call, you can also use a Bluetooth
headset to make or answer a call on line 1 or line 2.
Up to 4 devices can be paired to the telephone base. All paired devices are
shown on the device list. To use a paired device, it must be in an active slot (A:
or B:) on the device list and connected. Two Bluetooth cell phones can be on
a call at a time. While you are on a cell line call, you can also use a Bluetooth
headset to make or answer a call on line 1 or line 2.
Once you have paired a device with the telephone base, you do not need
to repeat the pairing procedure again unless you delete the device from the
device list.
to repeat the pairing procedure again unless you delete the device from the
device list.
Review the device list
Press
MENU
on the telephone base in idle mode.
Press
CID
, DIR,
/RECORD
or /DELETE to highlight Bluetooth, and
then press
SELECT
.
Press
CID
, DIR,
/RECORD
or /DELETE to highlight Device list, and
then press
SELECT
.
•
•
•
1.
2.
3.
NOTE: When connecting a Bluetooth device to the device list, all connected devices will be
temporarily disconnected until the procedure is complete. It may take up to 2 minutes to
reconnect.
temporarily disconnected until the procedure is complete. It may take up to 2 minutes to
reconnect.