DEI Headquarters Inc. DEI7756 用户手册
© 2013 Directed. All Rights Reserved
GPDRS7504 2013-07
Premier Defense PDRS-7504BKR 2-Way LCD Remote User Guide
Thank you for purchasing this Premier Defense Remote Transmitter. This guide provides a general description of operations for Premier Defense
Remote Start and Security Systems.
Remote Start and Security Systems.
LOCK: Locks the DOORS and arms the STARTER KILL (if installed).
UNLOCK: Unlocks the DOORS and disarms the STARTER KILL (if installed). Activates the AUX 1 output if Priority Door
Access is configured.
TRUNK: Opens the TRUNK or activates the AUX 3 output. Note: Trunk option must be installed.
START: Remote starts or stops the engine. Gets the system into Cold Weather mode by pressing the AUX button and then
pressing and holding the START/STOP button for 3 seconds.
“F”: This button serves as a second function button. This button allows assigning different functions to any of the other four
buttons and allows access to the menu.
Remote Pairing
Procedure
Confirmations
1. Setting the remote into pairing mode:
Press and hold “F” button until the “PAIR MODE” appears on
the remote’s LCD screen.
the remote’s LCD screen.
“PAIR MODE” text is displayed on the remote’s LCD screen for a period of 30seconds.
2. Turn the key to IGN ON.
3. Press release and then press and hold the antenna
programming button until the LED start flashing rapidly.
The Parking lights will stay ON for 20 seconds. From this point, the installer has 20seconds
to complete steps 4-5.
to complete steps 4-5.
4. Turn the key from IGN ON to IGN OFF and then OFF.
The parking light should turn OFF.
5. Press and release lock button.
The remote’s LCD screen will display “PASSED “and the parking lights will start flashing to
confirm successful learning of the remote.
FAILED PAIRING:
The remote’s LCD screen will display “FAILED”. First verify if the antenna is still flashing
rapidly, if yes, simply redo step4. Otherwise, repeat the whole process from STEP1.
confirm successful learning of the remote.
FAILED PAIRING:
The remote’s LCD screen will display “FAILED”. First verify if the antenna is still flashing
rapidly, if yes, simply redo step4. Otherwise, repeat the whole process from STEP1.
6. Press “F” button once OR leave the remote inactive for 30
seconds.
Note: To learn the remote to a second car that has the same system, in STEP4, press the TRUNK button instead of the LOCK button.
Government Regulations
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interference that may cause undesirable operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
To satisfy FCC RF exposure compliance requirements, this device should be used in hand-held, hand operated configurations only. The device and its
antenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure
compliance. This device is designed to be used in a person’s hands and its operating configurations do not support normal transmissions while it is
carried in pockets or holsters next to a person’s body.
Canada Statements
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Les changements ou modifications non approuvés expressément par la partie responsable de la conformité pourrait annuler l'autorité de l'utilisateur à
faire fonctionner l'équipement.