Digital Security Controls Ltd. 01NB9010 用户手册
C h a p t e r 2 : A d v a n c e d P r o g r a m m i n g
3 2
[09] - [
✱
]+[2] Trouble Display
This function key provides the user with a simple method for entering the Trouble
Display Mode (see [*] [2] Trouble Announcements on page 27).
Display Mode (see [*] [2] Trouble Announcements on page 27).
[10] - [
✱
]+[3] Alarm Memory
This function key provides the user with a simple method for entering the Alarm
Memory Display Mode (see [*] [3] Alarm Memory on page 28).
Memory Display Mode (see [*] [3] Alarm Memory on page 28).
[11] - [
✱
]+[5] Programming Access Codes
This function key provides the user with a simple method for programming access
codes. After this key is pressed a valid System Master or Supervisor Code will have
to be entered before the system will allow programming to be performed (see [*]
[5] Programming Access Codes on page 29).
codes. After this key is pressed a valid System Master or Supervisor Code will have
to be entered before the system will allow programming to be performed (see [*]
[5] Programming Access Codes on page 29).
[12] - [
✱
]+[6] User Functions
This function key provides the user with a simple method for programming User
Functions. After this key is pressed a valid System Master or Supervisor code must
be entered before the system will allow User Functions to be performed (see [*]
[5] Programming Access Codes on page 29).
Functions. After this key is pressed a valid System Master or Supervisor code must
be entered before the system will allow User Functions to be performed (see [*]
[5] Programming Access Codes on page 29).
[13] - [15] For future use
[16] - [
✱
]+[0] Quick Exit
Pressing this key will cause the system to activate the Quick Exit feature (see section
[*] [0] Quick Exit on page 30).
[*] [0] Quick Exit on page 30).
[17] - [
✱
]+[1] Reactivate Stay/Away Zones
This function key provides the user with a simple method for adding Stay/Away
zones back into the system (see [*] [1] Zone Bypassing on page 27).
zones back into the system (see [*] [1] Zone Bypassing on page 27).
[18] - [26] For future use
[27] - Status
Press this key to have the NT9010 announce the time and the current status of the
system. For example, the system may announce:
Press this key to have the NT9010 announce the time and the current status of the
system. For example, the system may announce:
“Zones are open. Zone 1. Secure system before turning on. For more options,
press [✱].”
press [✱].”
Pressing this key while the unit is speaking will cause the unit to stop speaking.
[28] - Volume
To change the volume of NT9010 announcements, press this key. The NT9010 will
announce the different volume levels.
To change the volume of NT9010 announcements, press this key. The NT9010 will
announce the different volume levels.
[29] - Record
Press this key to begin recording a message through the NT9010 microphone. After
you hear the prompt “Record Memo Now” and a single 1 second tone, begin
recording your message. When you are finished recording, press [#].
Press this key to begin recording a message through the NT9010 microphone. After
you hear the prompt “Record Memo Now” and a single 1 second tone, begin
recording your message. When you are finished recording, press [#].
[30] - Playback
Press this key to listen to a recorded message. If there is no message recorded, the
NT9010 will sound an error tone. You can stop playback of the recorded memo any
time by pressing [#].
Press this key to listen to a recorded message. If there is no message recorded, the
NT9010 will sound an error tone. You can stop playback of the recorded memo any
time by pressing [#].