Digital Security Controls Ltd. 06GS30551 用户手册
3
INTRODUCTION
,
,
,
,
,
This manual provides programming and operating instructions for the GS3055-I wireless alarm
communicators. Information relating to a specific model will be denoted by the applicable model number
within the text. The term "Device" is used to describe functionality that is applicable to both models. This
manual shall be used in conjunction with the installation manual of the control panel and power supply it
is connected to.
communicators. Information relating to a specific model will be denoted by the applicable model number
within the text. The term "Device" is used to describe functionality that is applicable to both models. This
manual shall be used in conjunction with the installation manual of the control panel and power supply it
is connected to.
FEATURES
Simulates land line
Switches automatically to GSM Network in the event land line trouble (line down)
Manages and signals Incoming/Outgoing calls
GSM signal indicator
4 programmable OC Outputs
Houses 12V - 1.2 Ah battery (not included)
Tamper protection
Land line overvoltage protection (optional)
Dual-Band
4 Input Lines
SMS Alerts
Contact ID Dialer throughout
Decoding Contact ID protocol from a PSTN interface for communication over the GPRS network
GPRS/Internet communication with Sur-Gard System III / II
13 SMS Messages (2 messages per Input Line and 5 Status messages)
8 phone numbers (max. 20 digits) programmable for SMS Dialler
4 phone numbers programmable for Contact ID Dialler
Up to 95 phone numbers (max. 20 digits) can be programmed to manage remote control of the OC Outputs
Remote control of the OC Outputs via SMS and/or over-the-phone after caller recognition
Pay-As-You-Go Balance message (for pre-paid SIM Cards)
Technical Specifications
The 13.8 V
_
(700 mA max.) power supply voltage to this Device can be drawn from the Control panel or provided by a
ADP1512 AC/DC adapter (accessory item) or provided by the PS4085 power supply.
Description
Value
Power Supply voltage
13.8 V_
Standby Current Draw
100 mA
Transmitting Current Draw
700 mA
Maximum loop resistance of line between the series device
and the CPE connected to the device
and the CPE connected to the device
1 Kohm
Maximum number of parallel CPE devices
2
Operating Temperature
+0° to +49° C
32 to 120 °F
Dimensions
138 x 224 x 55 mm
5.4 x 8.8 x 2.2 inch
5.4 x 8.8 x 2.2 inch
Weight (without battery)
900 g
3.2 oz.