ADC Telecommunications Inc. PRSM074C 用户手册
Managing Remote Units
Page 242
FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc
ADCP-77-073
• Issue 2 • 11/2009
4
4
If any status indicator in the
Major Alarms
or
Minor Alarms
table is red or yellow,
refer to the following list:
•
Remote Capacity
—Number of slots for RF Modules in the remote. Each RF
Module comprises up to two Classic DARTS or Single SuperDARTs or one Dual
SuperDART.
SuperDART.
•
Remote Temperature
field—Currently detected internal temperature of the
Remote (measured near the SeRF board).
•
Host Lost Fault
status indicator—Red indicates Remote has lost contact with
Host.
•
Remote Lost Fault
status indicator—Red indicates that the Host is unable to
communicate with the Remote.
•
AC Power Supply Fault
status indicator—Red indicates Remote power supply has
failed.
•
Over Temperature Fault
status indicator—Red indicates internal temperature in
Remote is over its functional operating limit. Fault threshold is
84°C
.
•
Fan Under Speed Fault
—Red indicates that the speed of the Remote fan is not
high enough for the internal functional temperature of the Remote.
•
Under Temperature Fault
status indicator—Yellow indicates that the internal
temperature within the Remote is under the operating limit. Fault threshold is
-40°C
.
•
Fan Over Speed Fault
—Yellow indicates that the Remote fan is not necessary for
the current internal temperature of the Remote, but the fan is spinning (Minor
alarm).
alarm).
•
Open Door Fault
—Yellow status indicator for this Minor alarm, which indicates
that the door to the Remote is open.
•
Apply
button—When clicked, causes Remote Name entry to be applied
•
Refresh
button—When clicked, causes page to be reloaded from Host
DART ID 8
RF Slot 4
DART ID 7
DART ID 6
RF Slot 3
DART ID 5
DART ID 4
RF Slot 2
DART ID 3
DART ID 2
RF Slot 1
DART ID 1
SERF Board