ADC Telecommunications Inc. PSM230WM 用户手册
FlexWave Prism Remote Unit RF Module Installation Guide
Page 25
TECP-77-141 Issue 8 • 300001744178 Rev H • August 2015
©2015 TE Connectivity
Dual-Bay Modules Only—Remove the Module Bay Shelf
1
Use 9/64” Allen Wrench to
remove the three module-shelf screws
remove the three module-shelf screws
Remove Module D Shelf for
Dual-Band Dual-Slot RF Modules
Dual-Band Dual-Slot RF Modules
Remove Module B Shelf for
Dual-Slot 40W RF Modules
Dual-Slot 40W RF Modules
FOR DUAL-BAY RF MODULES ONLY.
If you are installing a Dual-Bay RF Module, you
must remove a module bay shelf from the PRU
chassis to accommodate the module’s size.
(For further information, see
If you are installing a Dual-Bay RF Module, you
must remove a module bay shelf from the PRU
chassis to accommodate the module’s size.
(For further information, see
Remove the shelf as appropriate for the RF
Module:
Module:
•
When installing in the A and B Bays,
remove the Module B Bay Shelf.
remove the Module B Bay Shelf.
•
When installing in the C and D Bays,
remove Module D Bay Shelf.
remove Module D Bay Shelf.
To remove a Module Bay Shelf:
a
Use a 9/64” Allen
™
wrench to remove the
three screws that attach the module shelf
to the PRU chassis, as shown in the
following graphic.
to the PRU chassis, as shown in the
following graphic.
b
Discard or store the module shelf and
fasteners.
fasteners.