Fleetwood Group Inc ECM9XX 用户手册

 

15 

Battery 
Indicator 

Two students who are using Student Transceivers can communicate with each other by connecting a 
patch cord between the audio in/out jacks of both Student Transceivers. Both Students can now hear 
each other. The lesson channel should be set to the same channel for both Students. 
 

Battery Indicator is located in the upper left hand corner of the LCD screen. (see figure 9) 

 

 

 

 

Figure 9 

See section 3.2.1. - How to change batteries. 

The students can use a patch cord between their headset “MONITOR JACK” (#6) and a portable 
recorder (optional) mic/auxiliary input jack. Place the recorder in record mode by pressing the Play 
and Record Buttons. To play the recording back or play lessons individually to each student, plug the 
patch cord between each student’s portable recorder’s earphone or speaker out jack and the headset 
“MONITOR JACK” (#6). Select an unused but active channel on the student headset “CHANNEL 
SELECTOR” (#1) to avoid hearing two lessons. 

The Control Panel is located in the center of the console. To remove the Control Panel, please use the 
following instructions. 

•  Philips screwdriver 

1.  Turn off power and unplug the power cord from the wall receptacle.