Buffalo 09101485-0 用户手册
Connecting to a Preexisting Network
Add an AirStation without changing your existing LAN configuration:
1. Set the AirStation into Access Point Mode by moving the switch from ROUTER to AP.
2. Connect one of the AirStation’s LAN ports to an existing router or switch on your
2. Connect one of the AirStation’s LAN ports to an existing router or switch on your
network. Nothing should be plugged into the WAN (“Internet”) port.
3. Open LAN Settings - LAN Port Settings and configure the following settings:
IP Address =[192.168.11.137] (Specify an unused network address from the existing
IP Address =[192.168.11.137] (Specify an unused network address from the existing
LAN.)
Subnet Mask=[255.255.255.0] (Use the same Subnet Mask as the existing LAN.)
DHCP Server Function=[Disable]
4. Restart PC.
DHCP Server Function=[Disable]
4. Restart PC.