Buffalo 09101567-0 用户手册
Chapter 4 Configuration
WHR-HP-GN User Manual
43
Advanced
The screen to configure the advanced wireless settings.
Parameter
Meaning
BSS Basic Rate Set
Set the communication speeds of administrative and
communication control frames of the AirStation and wireless
devices.
communication control frames of the AirStation and wireless
devices.
Multicast Rate
Set the communication speed of multi-cast packets.
Reverse Direction Grant
For faster wireless communication, you may enable receiving
packets while sending packets.
packets while sending packets.
DTIM Period
Set the beacon responding interval (1 -255) which is notified to
a wireless device. This setting is effective only when the power
management feature is enabled on a wireless device.
a wireless device. This setting is effective only when the power
management feature is enabled on a wireless device.
Privacy Separator
If enabled, the Privacy Separator blocks communication between
wireless devices connected to the AirStation. Wireless devices will
be able to connect to the Internet but not with each other. Devices
that are connected to the AirStation with wired connections will
still be able to connect to wireless devices normally.
wireless devices connected to the AirStation. Wireless devices will
be able to connect to the Internet but not with each other. Devices
that are connected to the AirStation with wired connections will
still be able to connect to wireless devices normally.
Output Power
You may reduce the wireless radio power output. The power of
a radio wave and the distance that that radio wave reaches are
almost proportional, so if the output power is reduced, the distance
that the signal reaches also becomes smaller.
a radio wave and the distance that that radio wave reaches are
almost proportional, so if the output power is reduced, the distance
that the signal reaches also becomes smaller.