Buffalo 09101912-0 用户手册

  In the “Antenna Gain“ field, please enter the gain of the antenna on 

your router. The firmware will adjust the transmit power accordingly 
to meet regulatory requirements. Please keep in mind that very long 
cables can dampen the HF signal thus reducing the usable antenna 
gain. 

  Configure “Wireless Mode“ to “AP“ 
  Set your desired wireless mode in “Wireless Network Mode“. Please 

note that mixed modes will lead to reduced performance because of 
maintaining compatibility. 

  Enter a name for your wireless network into “Wireless Network Name 

(SSID)” 

  Click “Save“ 

 
Wireless -> Wireless Security 
  Choose and configure a security mode.  Please note that WEP is 

insecure and should only be used if no other option is available. 

  Click “Apply Settings“ 
 

You can now connect the router to the Internet and your local network. 
After you successfully connect wireless devices, they will then be 
displayed on the “SysInfo” and “WLAN Status” pages. 

 

 

Setup -> Basic Setup 
  WAN Setup 

o

  For “Connection Type“, choose “Disabled”.  

  Network Setup 

o

  Enter the desired LAN-side IP address for the router into “Router 

IP“.  

o

  Set the “DHCP Type“ to “DHCP Server“ (this is the default). 

o

  “Disable” “DHCP Server“. 

  Time Settings 

o

  Choose your time zone. 

  Click “Save“. 
 
Wireless -> Basic Settings 

  In the “Antenna Gain“ field, please enter the gain of the antenna on 

your router. The firmware will adjust the transmit power accordingly 
to meet regulatory requirements. Please keep in mind that very long 
cables can dampen the HF signal thus reducing the usable antenna 
gain. 

  Configure “Wireless Mode“ to “AP“ 
  Choose a wireless mode in “Wireless Network Mode“. Please note that 

mixed modes will lead to reduced performance because of maintaining 
compatibility. 

  Enter a name for your wireless network into “Wireless Network Name 

(SSID)”. 

  Click “Save“. 

 

- 19 -