Wulfsberg Electronics Division 2000-800 用户手册
P-2000/C-2000/RT-2000
Operator’s Manual
Page 4 of 39
Publication No. 150-049105
P-2000 Operators Manual
Rev. A
Oct 2003
Introduction
The Wulfsberg "2000" family of Flexcomm products are comprised of the P-2000 panel mount transceiver and the
RT-2000 remote mount transceiver which is controlled by the C-2000 control head. The P-2000 and RT-2000 are
capable of being populated with one or two ITM's (Internal Transceiver Modules) covering any combination of the
following frequency bands: VHF 136-174 MHz, UHF -1 (403-470 MHz), UHF -2 (450-520 MHz) and UHF800
(806-870 MHz). For applications where multiple points of user operation are required, one or more C-2000's can be
added.
RT-2000 remote mount transceiver which is controlled by the C-2000 control head. The P-2000 and RT-2000 are
capable of being populated with one or two ITM's (Internal Transceiver Modules) covering any combination of the
following frequency bands: VHF 136-174 MHz, UHF -1 (403-470 MHz), UHF -2 (450-520 MHz) and UHF800
(806-870 MHz). For applications where multiple points of user operation are required, one or more C-2000's can be
added.
For purposes of this manual the term "P-2000" shall be used to describe a P-2000 or C-2000/RT-2000 installation.
In both systems, the features and user interface is identical.
In both systems, the features and user interface is identical.
Features
The P-2000 provides a host of powerful features, including:
• Multi-band operations: One or Two ITM's covering any combination of the following frequency bands:
• 136 - 174 MHz (10/1 Watt Transmit Power)
• 403 - 470 MHz (10/1 Watt Transmit Power)
• 450 - 520 MHz (10/1 Watt Transmit Power)
• 806 - 870 MHz (3/1 Watt Transmit Power)
• Clear and bright Color LCD display showing Active/Standby channel selection along with other critical
operational information.
• 255 Preset channel memory in each internal transceiver module.
• The powerful yet incredibly simple user interface that allows the user to select channels using the firm tactile
feedback keypad or rotary knobs.
• Modulation types available in the P-2000 include FM analog, P25 Digital conventional, P25 Trunking and
Motorola 3600 Baud Trunking. Transceivers are capable of operating on 12.5 kHz, 20.0 kHz, and 25.0 kHz
channels depending on options.
channels depending on options.
• Multiple types of encryption are available as options (AES, DES, DES-XL, DES-OFB, DVP and DVI). In
addition, MDC1200 OTAR and P25 OTAR are standard in all models that include encryption capability.
• One or Two microphone/headset interfaces are supported. This provides retrofit applications the ability to use
both transceivers even if only one microphone/headset port is available on the aircraft audio panel system. If
two microphone/headset ports are used, the P-2000 is capable of independent operation of each ITM. In other
words, one user can be operating on FM1 while the other user independently uses FM2.
two microphone/headset ports are used, the P-2000 is capable of independent operation of each ITM. In other
words, one user can be operating on FM1 while the other user independently uses FM2.
• Advanced multi-radio modes, such as Relay, Simulcast and Relay-Simulcast.
• Programming port on the front of the panel allows for computer loading of channel information and encryption
key loading.