Wulfsberg Electronics Division 2000-800A 用户手册

Page 30 of 40 

Publication No. 150-049105 

Operator’s Manual  

Rev. B 

Dec 2004 

Before a transceiver will transmit encrypted messages, the user must load encryption keys into the transceiver.  To 
accomplish this, the user must first put the transceiver into KEY LOAD mode, and then using a Motorola KVL, load 
the keys.  Perform the following steps to load keys: 

•  From the HOME page press the PROG button.  If prompted, enter the password #1 (In the system programming 

options, the user has the option of eliminating this password by setting it to “0000”) 

 

 

•  Highlight the KEY LOAD option and press ENTER.   Enter password #2 to get to the Transceiver Setup page. 
 

 

•  In the XCVR field, select which transceiver (FM1 or FM2) to load keys. 

•  Highlight the START option and press the enter button to begin the encryption load process. 

•  Connect the KVL loader to the data port on the front of the P-2000 (or RT-2000, not the C-2000).  Load keys 

for both FM1 and FM2 if desired.  The key loader will indicate successful loading. 

•  Highlight the STOP option and press the enter button to end the encryption load process.  This will cause the 

system to briefly display a splash screen indicating that the system is busy. 

•  The unit will display a dialog box indicating that it needs to be restarted, highlight YES and press the enter 

button to restart the unit.