Wulfsberg Electronics Division CVC-151 用户手册
FLITELINE AVIONICS SYSTEM
PILOT’S GUIDE
Page 24
Publication No. 150-047012
Dec 2005
Rev. D
CVN-252 Controls (Series III and FliteLine Interface continued…)
264.0°
ACT
2
ON
BRG
RAD
111.40
The number 2 below the letters ACT represent Nav
System 2 when more than one Nav System is
installed. This number is fixed at the time of
installation. A blank below the letters ACT represent
either Nav System 3 (when more than 2 Nav
Systems are installed) or that only one Nav System
is installed.
System 2 when more than one Nav System is
installed. This number is fixed at the time of
installation. A blank below the letters ACT represent
either Nav System 3 (when more than 2 Nav
Systems are installed) or that only one Nav System
is installed.
CVN-252 Controls (Series III and FliteLine Interface - Failure Indication)
FAIL
1
ON
BRG
RAD
111.40
* Series III Interface (FliteLine Radio installations
may display these pages when configured as
Series III)
may display these pages when configured as
Series III)
A FAIL annunciation appears in the lower display to
indicate failure of the radio (such as the VNS-41A
System). Fail messages and their meanings are:
indicate failure of the radio (such as the VNS-41A
System). Fail messages and their meanings are:
• FAIL 1: NAV synthesizer out of lock.
• FAIL 2: G/S synthesizer out of lock.
• FAIL 3: NAV converter A/D check fail.
• FAIL 4: Non-volatile memory fail.
• FAIL 2: G/S synthesizer out of lock.
• FAIL 3: NAV converter A/D check fail.
• FAIL 4: Non-volatile memory fail.
These annunciation’s are the result of a continual
system self-test, and indicate that maintenance is
required before the system may be used.
system self-test, and indicate that maintenance is
required before the system may be used.