Wulfsberg Electronics Division CVC-151 用户手册
FLITELINE AVIONICS SYSTEM
PILOT’S GUIDE
Page 56
Publication No. 150-047012
Dec 2005
Rev. D
CTR-352 Controls (ARINC-410 Octal Interface continued…)
CHELTON
ATC
PWR
SEL
MODE
TUNE
1200
TST
SBY
ON
ALT
ATC
1
Outer Knob
TST
- Test Mode
1. Outputs a Test or Self Test discrete Signal to
the radio.
Note 1: The function of the Test/Self Test signal
varies with regard to the installed radio.
Please refer to the operation manual
specific to the radio.
Please refer to the operation manual
specific to the radio.
Note 2: The code may be changed while in Test
Mode.
Note 3. The selected Transponder ID may be
changed while in Test Mode in order that
both Transponder systems may be put test
mode
both Transponder systems may be put test
mode
Note 4. The VFR Quick Tune feature is not
available in Test Mode.
Note 5. The Altitude Reporting (Mode A/C) is active
when the code is 1200. For all other codes
reporting is Mode A only. This allows the
operator to test reporting modes separately
if supported by the radio.
reporting is Mode A only. This allows the
operator to test reporting modes separately
if supported by the radio.
CHELTON
ATC
PWR
SEL
MODE
TUNE
1200
TST
SBY
ON
ALT
ATC
1
Inner Knob
CURSOR CONTROL
The Cursor is a white rectangle that surrounds the
currently selected field.
currently selected field.
The left inner knob moves the Cursor between the
Transponder System ID and the ATC Code.
Transponder System ID and the ATC Code.
Note: The Cursor will return to the ATC Code field
after 5 seconds of inactivity on any other field.
after 5 seconds of inactivity on any other field.