Everspring Industry Co Ltd HSP01 用户手册

1 

 

 
The HSP01 PIR Motion Detector is a U-Net device and is fully compatible with other 
U-Net devices. This Detector is designed with a Passive Infra-Red (PIR) sensor and 
light sensor in order to fulfill the purpose of security and home automation. It detects 
motion by monitoring changes in infra-red radiation levels emitted by body heat. Its 
great compatibility with our U-Net family security products makes it suitable for 
smart home cloud based platforms such as Homesys. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

Red LED 

Used to indicate trigger events, low battery power, and warm up

Green LED 

Used to indicate key learning controls

Orange LED 

Used to indicate no codes learned

1.  Undo and remove the fixing screw from the bottom of the detector. Carefully 

pull the bottom of the detector away from the rear cover and then slide down to 
release the top clips. 

 
 
 
 

 

 

2.  Prepare a CR123A battery. Do not insert the battery into the unit yet. 
3.  Log into the Homesys account from a web browser. 
4.  Select “System” then “Add a Device”. 
 

5. Select “PIR Detector”. 

 

 

 

 

 

 

 

 

 

 

 

6.  The following screen will appear. This means the gateway is entering binding 

mode.