Technicolor Connected Home USA LLC TC8717C 用户手册
Must not be exposed to heat trap conditions and must not be subjected to water or condensation. Batteries
(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Must be installed in a Pollution Degree 2 environment (Environment where there is no pollution or only dry,
nonconductive pollution).
nonconductive pollution).
Cleaning
Unplug this product from the wall socket and computer before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Water and moisture
Use a damp cloth for cleaning.
Water and moisture
Do not use this product near water, for example near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement
or near a swimming pool. Transition of the product from a cold environment to a hot one may cause condensation on
some of its internal parts. Allow it to dry by itself before re-starting the product.
Interface classifications
or near a swimming pool. Transition of the product from a cold environment to a hot one may cause condensation on
some of its internal parts. Allow it to dry by itself before re-starting the product.
Interface classifications
The external interfaces of the product are classified as follows:
Phone: TNV circuit, not subjected to over voltages (TNV-2)
Cable, MoCA, RF: TNV circuit subject to overvoltages (TNV-1)
All other interface ports (e.g. Ethernet, USB, etc.), including the low voltage power input from the AC mains power
supply: SELV circuits.
supply: SELV circuits.
Electrical powering
The powering of the product must adhere to the power specifications indicated on the marking labels.
USB
USB
The device is to be connected to an identified USB port complying with the requirements of a Limited Power Source.
Accessibility
Accessibility
The plug on the power supply cord serves as disconnect device. Be sure that the power socket outlet you plug the
power cord into is easily accessible and located as close to the equipment as possible.
Overloading
power cord into is easily accessible and located as close to the equipment as possible.
Overloading
Do not overload mains supply socket outlets and extension cords as this increases the risk of fire or electric shock.
Servicing
Servicing
To reduce the risk of electric shock, do not disassemble this product. None of its internal parts are user-replaceable;
therefore, there is no reason to access the interior. Opening or removing covers may expose you to dangerous voltages.
Incorrect reassembly could cause electric shock if the appliance is subsequently used.
If service or repair work is required, take it to a qualified service dealer.
Damage requiring service
therefore, there is no reason to access the interior. Opening or removing covers may expose you to dangerous voltages.
Incorrect reassembly could cause electric shock if the appliance is subsequently used.
If service or repair work is required, take it to a qualified service dealer.
Damage requiring service
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
conditions:
When the power supply or its plug are damaged.