Comtrol RocketLinx ES7506 32050-0 产品宣传页
产品代码
32050-0
Comtrol’s RocketLinx ES7506 PoE Plus switch is designed for
industrial PoE applications such as IP surveillance or wireless access
points, where the power source is not conveniently located.
industrial PoE applications such as IP surveillance or wireless access
points, where the power source is not conveniently located.
The RocketLinx ES7506 supports intelligent PoE control and
schedule management. Each of the four PoE Plus ports can be
configured in a weekly schedule by hourly basis and PoE on/off can
be remotely controlled via SNMP and Web.
schedule management. Each of the four PoE Plus ports can be
configured in a weekly schedule by hourly basis and PoE on/off can
be remotely controlled via SNMP and Web.
It is compliant to both the pioneer standard of IEEE 802.3at PoE Plus
designed for boosting PoE delivery up to 30W in each of the four PoE
ports as well as the IEEE 802.3af standard. The RocketLinx ES7506
can auto-detect 24V and 48V power input and can deliver 24V and
48V PoE outputs which allow more applications where 48VDC is not
an option.
designed for boosting PoE delivery up to 30W in each of the four PoE
ports as well as the IEEE 802.3af standard. The RocketLinx ES7506
can auto-detect 24V and 48V power input and can deliver 24V and
48V PoE outputs which allow more applications where 48VDC is not
an option.
The two uplink ports can be configured as Redundant Ring ports
recovering network failure in less than 5ms, or RSTP ports integrating
with other standard switches. Full network management features
such as SNMP v3, QoS, IGMP v3 are all supported. If the powered
device fails to respond after a pre-configured time interval, the
product will reboot the powered device and continue to monitor
the powered device in every pre-configured time interval. Also,
unmanageable powered devices can be managed through the
RocketLinx switch.
recovering network failure in less than 5ms, or RSTP ports integrating
with other standard switches. Full network management features
such as SNMP v3, QoS, IGMP v3 are all supported. If the powered
device fails to respond after a pre-configured time interval, the
product will reboot the powered device and continue to monitor
the powered device in every pre-configured time interval. Also,
unmanageable powered devices can be managed through the
RocketLinx switch.
The IP31 rigid aluminum flat casing and wide operation temperature
range ensure reliable operation in places such as mass transit
vehicles or outdoor usage.
range ensure reliable operation in places such as mass transit
vehicles or outdoor usage.
• Four 10/100BASE-TX Power over Ethernet Plus ports
and two redundant 10/100BASE-TX uplink ports
and two redundant 10/100BASE-TX uplink ports
• DC 48V Power Input for IEEE 802.3af PoE output
(IEEE 802.3af)
(IEEE 802.3af)
• Up to 30W per port for PoE plus High Power solution
with DC 55V Power Input (IEEE 802.3at)
with DC 55V Power Input (IEEE 802.3at)
• Power Input for 24VDC output through Ethernet
(Non-standard PoE)
(Non-standard PoE)
• UP to 100W for total power budget
• Support IEEE 802.3af for PoE detection and PoE
classification resistors
classification resistors
• PoE control and schedule by hour/weekly basis
• Auto-detect Powered Device status for device
auto-reset (LPLD)
auto-reset (LPLD)
• Redundant Ring technology, back up system recovery
time less than 5ms
time less than 5ms
• SNMP v1/v2c/v3, IGMP snooping v1/v2/v3, RMON,
VLAN, QoS
VLAN, QoS
• Network security by IP/MAC address, SSL and SSH
• Built-in hardware watchdog timer for system auto-reset
• Aluminum rugged enclosure with IP31 grade protection
• Forced mode powering
• Wide operating temperature range (-20
o
to 60
o
C)
H I G H L I G H T S
ROCKET
LINX
ES7506
Industrial Managed PoE Plus Switch
Product Description
Part Number
32050-0
32050-0
PoE Plus
is IEEE 802.3at and
IEEE 802.3af compliant