Rosslare Enterprises Ltd AYCF6X 用户手册
Reader Operation
30
AYC-F/G/M60 Series Installation and Programming Manual
You hear three beeps.
The system returns to Standby mode.
The system returns to Standby mode.
4.2.9
Setting the Credential Format
To set the credential format:
1.
Enter Programming mode.
2.
Press 6 to enter Menu 6.
The left LED turns red.
3.
Enter one of the following codes:
61 for Rosslare Proximity
62 for HID Prox
63 for Rosslare Proximity + HID Prox (default)
You hear three beeps.
The system returns to Standby mode.
The system returns to Standby mode.
4.2.10
Return to Factory Default Settings
You must be very careful before using this command! This
erases the entire memory and returns all codes to their factory
default setting.
erases the entire memory and returns all codes to their factory
default setting.
To return to factory default settings:
1.
Enter Programming mode.
2.
Press 0 to enter Menu 0.
Both LEDs flash red.
Red Red
Green
Red
Red Green
Green
Red