Rosslare Enterprises Ltd AYC-T65 用户手册
Controller Functionality
60
AYC-Ex5 and AYC-T65 Installation and Programming Manual
5.
Enter your Programming code to confirm the deletion.
If the Programming code is valid, you hear three beeps and the
unit returns to Normal mode.
If the Programming code is invalid, you hear a long beep and the
unit returns to Normal mode.
unit returns to Normal mode.
If the Programming code is invalid, you hear a long beep and the
unit returns to Normal mode.
It is recommended that a record be kept of added and deleted
users so that it is easier to keep track of which user slots are
users so that it is easier to keep track of which user slots are
empty and which user slots are not.
6.9.15
Relay Codes Assignment
When a primary code is enrolled for any user, the user is authorized
to activate the Lock Strike relay. However, different user codes may
to activate the Lock Strike relay. However, different user codes may
be set to operate the auxiliary relay instead or operate both the Lock
strike and auxiliary relay. Assignment of such codes is achievable for
strike and auxiliary relay. Assignment of such codes is achievable for
any valid user code entered in the controller.
There are two methods to assign relay codes to users: a standard
method and a search method.
There are two methods to assign relay codes to users: a standard
method and a search method.
6.9.16
Relay Code Assignment using Standard Method
1.
Enter Programming mode.
2.
Press “9” to enter Menu 9.
The Mode LED turns green and
the Door LED turns orange.
the Door LED turns orange.
3.
Enter the 3-digit user slot for
code assignment.
The Mode LED flashes green.
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Green Orange
Mode/Transmit
Door/Program
Green Orange