Eizo Nanao Corporation ES150 用户手册
Component / RGB / RGBS CONNECTION INSTRUCTION
For Component (YPbPr) Connection
1. Connect DVI-A to BNC Female cable onto the monitor via DVI port.
2. Connect BNC (YPbPr) cables from the video source to the DVI-A to BNC Female
cable. Red (Pr) connect to Red BNC, Green (Y) connect to Green BNC, and
Blue (Pb)connect to Blue BNC.
3. The video source should have components output on the video equipment for
components (YPbPr) video out.
4. To select component mode in the monitor, push “Select” button on the monitor
until it reach “Component / RGB” input or can select in the OSD by Push
“Up Arrow” button then the OSD Menu will pop-up, Push “Up Arrow” or
“Down Arrow” button to select “Input Source Select” then push select button to
enter Input Source Select Menu, Push “Up Arrow” or “Down Arrow” button to
select “Component / RGB” then push select button.
2. Connect BNC (YPbPr) cables from the video source to the DVI-A to BNC Female
cable. Red (Pr) connect to Red BNC, Green (Y) connect to Green BNC, and
Blue (Pb)connect to Blue BNC.
3. The video source should have components output on the video equipment for
components (YPbPr) video out.
4. To select component mode in the monitor, push “Select” button on the monitor
until it reach “Component / RGB” input or can select in the OSD by Push
“Up Arrow” button then the OSD Menu will pop-up, Push “Up Arrow” or
“Down Arrow” button to select “Input Source Select” then push select button to
enter Input Source Select Menu, Push “Up Arrow” or “Down Arrow” button to
select “Component / RGB” then push select button.
For RGB Connection
1. Connect DVI-A to BNC Female cable onto the monitor via DVI port.
2. Connect BNC (RGB) cables from the video source to the DVI-A to BNC Female
cable. Red (R) connect to Red BNC, Green (G) connect to Green BNC, and
Blue (B)connect to Blue BNC.
3. The video source should have RGB output on the video equipment for RGB video
out.
4. To select RGB mode in the monitor, push “Select” button on the monitor until it
reach “Component / RGB” input or can select in the OSD by Push “Up Arrow”
button then the OSD Menu will pop-up, Push “Up Arrow” or “Down Arrow” button
to select “Input Source Select” then push select button to enter Input Source
Select Menu, Push “Up Arrow” or “Down Arrow” button to select “Component/RGB”
then push select button.
2. Connect BNC (RGB) cables from the video source to the DVI-A to BNC Female
cable. Red (R) connect to Red BNC, Green (G) connect to Green BNC, and
Blue (B)connect to Blue BNC.
3. The video source should have RGB output on the video equipment for RGB video
out.
4. To select RGB mode in the monitor, push “Select” button on the monitor until it
reach “Component / RGB” input or can select in the OSD by Push “Up Arrow”
button then the OSD Menu will pop-up, Push “Up Arrow” or “Down Arrow” button
to select “Input Source Select” then push select button to enter Input Source
Select Menu, Push “Up Arrow” or “Down Arrow” button to select “Component/RGB”
then push select button.
For RGBSync Connection
1. Connect DVI-A to BNC Female cable onto the monitor via DVI port.
2. Connect BNC (RGB) cables from the video source to the DVI-A to BNC Female
cable. Red (R) connect to Red BNC, Green (G) connect to Green BNC,
Blue (B)connect to Blue BNC and SYNC (V) connect to White BNC.
3. The video source should have RGBSync output on the video equipment for
RGBS video out.
4. To select RGBSync mode in the monitor, push “Select” button on the monitor until
it reach “Component / RGB” input or can select in the OSD by Push “Up Arrow”
button then the OSD Menu will pop-up, Push “Up Arrow” or “Down Arrow” button to
select “Input Source Select” then push select button to enter Input Source Select
Menu, Push “Up Arrow” or “Down Arrow” button to select “Component / RGB” then
push select button.
2. Connect BNC (RGB) cables from the video source to the DVI-A to BNC Female
cable. Red (R) connect to Red BNC, Green (G) connect to Green BNC,
Blue (B)connect to Blue BNC and SYNC (V) connect to White BNC.
3. The video source should have RGBSync output on the video equipment for
RGBS video out.
4. To select RGBSync mode in the monitor, push “Select” button on the monitor until
it reach “Component / RGB” input or can select in the OSD by Push “Up Arrow”
button then the OSD Menu will pop-up, Push “Up Arrow” or “Down Arrow” button to
select “Input Source Select” then push select button to enter Input Source Select
Menu, Push “Up Arrow” or “Down Arrow” button to select “Component / RGB” then
push select button.
14 User’s Guide