Badger Meter Inc 2011W 用户手册

The ORION Remote Wall Mount Box Enclosure Kit is for use with either the Recordall Transmitter Register (RTR) or Absolute 

Digital Encoder (ADE) stepped tube and threaded tube ORION endpoint for remote mounting applications. The Remote 

Box Enclosure is designed for mounting ORION endpoints in indoor or outdoor environments and also provides an 

environmentally protected area for gel splice connections (if needed) to be maintained inside the enclosure.

The ORION Remote Wall Mount Box Enclosure Kit is recommended for proper mounting of the ORION endpoint for remote 

applications.

Remote Box Enclosure

ORION CE RTR Endpoint

To install an ORION endpoint using the Remote Box Enclosure, follow these steps. 

1.  Flip the Remote Box Enclosure over and look inside to verify the proper orientation. Locate the three security ribs 

inside the Remote Box Enclosure to determine the top of the enclosure.  

 

The bottom of the Remote Box Enclosure is identified by the two strain relief tabs located on both sides of the  

enclosure housing and the hole in the bottom of the enclosure that allows access to the endpoint IR communication 

port without having to disassemble the unit (Figure 8).

 5-11)

Page 11