Psion Inc 7505BTMW 用户手册
Chapter 6: Peripheral Devices & Accessories
Cleaning The CH1000 Vehicle Cradle
Ikôn Rugged PDA (Windows CE 5.0) User Manual
235
•
Ensure the mounting has the capacity to hold the cradle and the Ikôn. Cradle plus Ikôn
weight is approximately 1kg (2.2 lb.).
weight is approximately 1kg (2.2 lb.).
•
Psion Teklogix has recommended and approved mounts—consult Customer Service
for information.
for information.
Figure 6.11 Removing The RAM Mount Interface
To accommodate the service loop of the power cable, leave a 10.2 cm (4 in.) clearance at the
bottom of the vehicle cradle. Leave a 17.8 cm (7 in.) clearance at the top of the vehicle
cradle to allow easy removal of the Ikôn. When selecting a mounting location, refer to the
detailed assembly instructions that are packaged with the pedestal.
bottom of the vehicle cradle. Leave a 17.8 cm (7 in.) clearance at the top of the vehicle
cradle to allow easy removal of the Ikôn. When selecting a mounting location, refer to the
detailed assembly instructions that are packaged with the pedestal.
If you elect to use a third party company-produced cradle, Psion Teklogix cannot take re-
sponsibility for the effects of that third party product when it causes failure to our device.
sponsibility for the effects of that third party product when it causes failure to our device.
6.9.4
Cleaning The CH1000 Vehicle Cradle
Important: Before Psion Teklogix releases a product, our engineering team exposes
that product to vibration tests to ensure the Ikôn will remain secure during
normal use. But as a low cost mount, the cradle will not defend against
shock if the vehicle undergoes a front or rear impact. Take care to mount
the cradle in an upright position in case of accidents.
normal use. But as a low cost mount, the cradle will not defend against
shock if the vehicle undergoes a front or rear impact. Take care to mount
the cradle in an upright position in case of accidents.
Important: Dampen a soft cloth with mild detergent to wipe the unit clean.