Wulfsberg Electronics Division NTX403 用户手册

SM28 Rev. 2.10 

NTX Series Remote Mount FM Transceivers Manual 

 

Information in this section consists of: unpacking and inspection procedures, installation 
procedures, post-installation checks, and installation drawings.  

Unpack the equipment carefully, and locate the warranty card. Inspect the unit visually 
for damage due to shipping and report all such claims immediately to the carrier 
involved.  Note that each unit should have the following: 
 
 

- NTX Series Transceiver 

 

- Warranty Card 

 

- Release certification 

 
Verify that all items are present before proceeding, and report any shortage immediately 
to your supplier. 
 
Complete the warranty card information, and send it to NAT when the installation is 
complete. If you fail to complete the warranty card, the warranty will be activated on 
date of shipment from NAT. 

← IMPORTANT! 

Do not bundle any lines from this unit with transmitter coax lines.  Do not bundle any 
logic, audio, or DC power lines from this unit with 400 Hz synchro wiring or AC power 
lines.  Do not position this unit next to any device with a strong alternating magnetic 
field such as an inverter or significant interference to operation will result.  In all 
installations, use shielded cable exactly as shown and ground as indicated.  
Significant problems may result if these guidelines are not followed. 

Oct 25, 2002 

Page 2-1 

 

ENG-FORM: 805-0104.DOT