Climax Technology Co Ltd CTC1052RV 用户手册
18
a short beep will be heard via the
phone set.
phone set.
Step 2: Press the Pendant Button within 20
secs.
)
Learning can only be completed
within the signal reception range of
CTC-1052RV.
within the signal reception range of
CTC-1052RV.
)
If no signal is received within 20
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
Step 3: CTC-1052RV will emit 2 beeps to
indicate that Pendant #1 is learnt-in
successfully.
successfully.
)
Adding a Pendant for a second
time is prohibited unless it is
removed from the system first.
time is prohibited unless it is
removed from the system first.
)
If one long beep is emitted
instead of 2 beeps, it indicates:
instead of 2 beeps, it indicates:
9
The device has already been
learnt-in.
learnt-in.
9
Another device has been learnt-
in before.
in before.
Command 92
Learn-In Pendant #2
<
<
N
N
O
O
T
T
E
E
>
>
)
This command is not available in
Remote Programming Mode.
z
Only one Pendant (WTR- Series or Fall
Sensor only) can be learnt into CTC-
1052RV by using Command #92.
Sensor only) can be learnt into CTC-
1052RV by using Command #92.
z
If you have learned one device into the
system by using local learning method (as
mentioned in 2.2 section), you are not
allowed to use Command 92 to learn in
another device.
system by using local learning method (as
mentioned in 2.2 section), you are not
allowed to use Command 92 to learn in
another device.
z
For learning Pendant #2:
Step 1: Enter 92 + # on the phone set, then
a short beep will be heard via the
phone set.
phone set.
Step 2: Press the Pendant Button within 20
secs.
)
Learning can only be completed
within the signal reception range of
CTC-1052RV.
within the signal reception range of
CTC-1052RV.
)
If no signal is received within 20
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
beep and automatically returns to
Programming mode.
Step 3: CTC-1052RV will emit 2 beeps to
indicate that Pendant #2 is learnt-in
successfully.
successfully.
)
Adding a Pendant for a second
time is prohibited unless it is
removed from the system first.
time is prohibited unless it is
removed from the system first.
)
If one long beep is emitted
instead of 2 beeps, it indicates:
instead of 2 beeps, it indicates:
9
The device has already been
learnt-in.
learnt-in.
9
Another device has been learnt-
in before.
in before.
Command 93
Learn-In Silent Pendant
<
<
N
N
O
O
T
T
E
E
>
>
)
This command is not available in
Remote Programming Mode.
z
Only one Silent Pendant (WTR- Series or
Fall Sensor only) can be learnt into CTC-
1052RV by using Command #93.
Fall Sensor only) can be learnt into CTC-
1052RV by using Command #93.
z
For learning Silent Pendant:
Step 1: Enter 93 + # on the phone set, then
a short beep will be heard via the
phone set.
phone set.
Step 2: Press the Pendant Button within 20
secs.
)
Learning can only be completed
within the signal reception range of
CTC-1052RV.
within the signal reception range of
CTC-1052RV.
)
If no signal is received within 20
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
Step 3: CTC-1052RV will emit 2 beeps to
indicate that Silent Pendant is
learnt-in successfully.
learnt-in successfully.
)
Adding a Pendant for a second
time is prohibited unless it is
removed from the system first.
time is prohibited unless it is
removed from the system first.
)
If one long beep is emitted
instead of 2 beeps, it indicates:
instead of 2 beeps, it indicates:
9
The device has already been
learnt-in.
learnt-in.