Climax Technology Co Ltd CTC1052RV 用户手册

3 

CTC-1052RV Panel features built-in 
GPRS/GSM communication facility to report to 
the Monitoring Station. 

 

z  To Insert SIM card: 

) 

It is recommended to disable the SIM 

card PIN code before inserting into the 
Control Panel.  

The GPRS/GSM SIM card base is located on 
the rear side of the unit: 

 

z  Insert the SIM card with the chip side 

facing up. 

 

z  Push to the furthest extend, then press on 

the edge of the SIM card firmly to secure it. 

z  SIM Card will delete its SMS message 

whenever the CTC-1052RV is powered on.  

z  To remove SIM card: 

Press and release on the edge of SIM card, the 
card will spring out. 

 

 

 

 

 

 

 

 

 

 

 

 

z  The Control Panel requires main power 

and a constant GPRS/GSM reception. 

z  The Control Panel should be easily 

accessible. 

z  The Control Panel should not be placed in 

a damp location, such as a bathroom. 

z  The Control Panel should not be placed 

close to any heat source, such as 
microwave ovens, which can reduce 
signal strength. 

z  The Control Panel should not be located 

alongside other radio transmitting devices, 
such as mobile phones, cordless phone, 
or wireless computer network (Wi-Fi) 
devices. 

z  Important: When drilling into a wall, ensure 

there are no hidden cables or pipes. 

 

The Control Panel can be mounted on the wall 
or wherever desired (e.g. on the table).  Ensure 
the Control Panel is fitted at approximately 
chest height where the buttons, microphone, 
and speaker can be easily accessed and 
operated. 

z  Use the 2 holes of the Wall Mounting 

Bracket as a template, mark off the holes’ 
positions. 

z  Drill 2 holes and insert the wall plugs if 

fixing into plaster or brick. 

z  Screw the base to the wall. 

z  Hook the Control unit onto the Wall 

Mounting Bracket (holding the unit with 
the front facing you).  

 

CTC-1052RV is compatible with Climax’s SMS 
Editor, which is designed to facilitate SMS 
remote programming via a PC. This tool allows 
you to program the panel easily from your 
computer, without sending complex SMS text 
messages from a mobile phone.