Climax Technology Co Ltd PB 用户手册





After the Panic Button is learned successfully, press the Button to activate a Panic Alarm.



Press and hold the Button for 8 seconds or more will send a Cancel Code to the Control Panel
to stop the alarm. (This function is not compatible with all control panels.)



The Panic Button can be mounted using two methods: Self-adhesive or Screw mounting.



I. 

C

lean the surface with a suitable degreaser. 

II. Remove the protective covering from one side of double-sided adhesive pad and firmly

apply to the back of the device. 

III. Remove the other covering and firmly place/press the device in the desired location.

  Do not use the Self-adhesive mounting method on poorly painted and/or rough 

surfaces. 



The base has two screw knockouts, where the
plastic is thinner for mounting purposes. To
mount the Panic Button:

I. 

Remove the cover-fixing screw and 

separate the top cover from the base. 

II.

Break through the knockouts on the base.

III.

Use the holes as a template to drill two

holes and insert the wall plugs.

IV.

Screw the base into the wall plugs.

V. 

Replace the top over the base by hooking 

the base onto the fixing hook and pushing
the cover towards the base.

VI.

Lightly tighten the screw.

This device complies with Part 15

 of the FCC Rules. Operation is subject to the following two 

conditions: 
(1) 

 This device may not cause harmful interference, and  

(2)

  This device must accept any interference received, including interference that may cause 

undesired operation.