Fimi Srl 802180 用户手册
VERIFICATION ONLY
21
NOT RELEASED
3 Getting started
3.1 Pre requisites
The NGP1 Computing Platform is a component (or subsystem) of Medtronic Carelink
Encore Programmer and other subsystems are the Medtronic Patience Interface(MPI) and
associated Firmware, cables and software.
The operation of the computing platform is then depending on the loaded OS and
applications. So the following user information are covering only functionalities that are
minimally depending on the final use and configuration.
3.1.1 Insert the battery
The NGP1 Computing Platform includes a high capacity Lithium-ion battery that fits into
the right side of the unit Under normal conditions, you can run the NGP1 Computing
Platform on battery power for about two and a half hours. Keep the battery in an ambient
temperature of less than 40°C (104°F).
The battery, removed from its envelope, can be inserted as follows
the right side of the unit Under normal conditions, you can run the NGP1 Computing
Platform on battery power for about two and a half hours. Keep the battery in an ambient
temperature of less than 40°C (104°F).
The battery, removed from its envelope, can be inserted as follows
Open the door with an upwards movement , being sure that the NGP1 Computing Platform
is in a stable position or it is held firmly. Then fully rotate clockwise the door. The battery
is in a stable position or it is held firmly. Then fully rotate clockwise the door. The battery
is anyhow kept in position by a hook located on the lower side of the door opening.
Push the hook downwards until the battery is released and slightly ejected by the spring
loading mechanism.
Push the hook downwards until the battery is released and slightly ejected by the spring
loading mechanism.
Lift the door up by pressing
upward on the battery door
upward on the battery door
recess