Fimi Srl 802180 用户手册
VERIFICATION ONLY
25
NOT RELEASED
The AC adapter allows to power the Computing Platform and to charge the battery pack, if
present.
For additional information about the NGP1 Computing Platform AC adapter, please consult
3.1.3 Turning the system on
The NGP1 Computing Platform can be turned on by pressing
the Power ON / stand by button.
After one second the LED turns ON. For a complete
the Power ON / stand by button.
After one second the LED turns ON. For a complete
indication about this LED signalling, see below.
The system starts booting.
The system starts booting.
Note: When there is the AC adapter inserted, the NGP1 Computing
Platform is losing its IP21 grade.
Platform is losing its IP21 grade.
It is then recommended, when using the NGP1 Computing Platform
disconnected from the AC adapter, to carefully close the rubber door. The
AC adapter must not be used in wet environments or when the NGP1
disconnected from the AC adapter, to carefully close the rubber door. The
AC adapter must not be used in wet environments or when the NGP1
Computing Platform is cleaned with liquids.
Note: When the AC adapter is
inserted and connected to the mains
inserted and connected to the mains
while the Computing platform is off ,
the Power LED on the keyboards
blinks at a rate of 0.4 – 0.5 Hz in
blinks at a rate of 0.4 – 0.5 Hz in
order to indicate the existing
connections to the mains.
connections to the mains.