DTC Communications Inc. VMDTX100C 用户手册

5

 Set to the required configuration as indicated by the switch position. Refer to the 

Programming section on page 10 for more information on switch settings. Your 
Transmitter is now operational. Confirm its signal with your receiver.

NOTE: The VMD Transmitter features 16 programmable configurations (0 - 9, 
A - F). If you plan to operate the VMD Transmitter with an older, 8-configuration 
receiver (1 - 8), we recommend that you configure only positions 1 through 8 on 
the transmitter. This will make it easier to coordinate your devices.

VMD Transmitter,  

Front View 

Antenna Connector

• 10 cell AA Lithium Battery Pack 
• 12 VDC 2.5A Power Supply & AC Line Cord
• Power, Video, & Audio Cable 
• Camera Power Cable (2.1 mm plug)
• Programming Cable
• SDI User Data Cable
• RCA to BNC Adapter
• Antenna
• Configuration Software 
• Transport Case
• Microphone, Body-Worn, (2)
• Heatsink

Multi-I/O Connector