Advance Security Inc R42 用户手册

下载
页码 9
ON
O
O R
O F F
O R
Remove the Dealer Key
Turn On Ignition
Insert the Customer Key
A. Another short horn chirp indicates
the key code was learned. 
Note: The system will automatically
exit code learning if a key is not
inserted within 15 seconds.
*** Model: 5900PKP
Turn Off Ignition
A. A short and long horn chirp
indicates you have exited code
learning.
Remove the Customer Key
S t e p   3
S t e p   4
S t e p   6
S t e p   8
S t e p   7
Insert the Dealer Key
S t e p   2
Insert the Valet Switch
S t e p   1
Dealer Switch
(Red Button)
Consumer Switch
(Black Button)
Push the Valet Switch
3 Times for Red Button
6 Times for Black Button
(Represents 3 Times On/Off)
A. Long horn chirp indicates the unit is in
code learning mode.
S t e p   5
Note: The dealer key will be erased when programmed to the customer key.
C O N S U M E R   K E Y   C O D I N G
ON
OFF
Momentary Switch 
(Push On/Off)
Toggle Switch 
(Push On then
push it again for off)
**
*
* Model: 5910K
** Model: 5900-DB (Blue Key)
5900-DG (Green Key)
5900-DR (Red Key)
5900-DY (Yellow Key)
***
Models: 7921P, 7909P, 7905P
6900P, 6900P-2, 6905P, 6909P
Proposed
© 2005 Copyright Magnadyne Corp.
1111 West Victoria Street 
Compton, CA 90220
www.magnadyne.com
 
This device complies with part 15 of the FCC rules.  Operation is subject to the following two conditions.
1)•This device may not cause harmful interference, and
2)•This device must accept any interference received, including interference that may cause undesired operation.
Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for compliance 
could void the user’s authority to operate the equipment.