Tyco Safety Products/Sensormatic UMADSNE 用户手册
Preliminary
AMS-3000 ANTENNA INSTALLATION GUIDE (8200-0179-02, REV. 0)
1 of 12
AMS-3000 Antenna
with Digital 216
Controller
Controller
Installation Guide
ZSLOOP
Contents
About this Guide ................................................ 1
About the Product .............................................. 1
Installation Requirements .................................. 2
Tools and Equipment Required .................. 3
Installation.......................................................... 3
Planning the installation .............................. 3
Installing the controller ................................ 4
Installing the equipment in the floor ............ 4
Preparing the extrusions ............................. 6
Mounting extrusions .................................... 9
Installing the cap box .................................. 9
Connect antenna and receiver wires to
controller.................................................... 10
controller.................................................... 10
Connecting the remote alarm.................... 10
Configuring, tuning, and testing ................ 10
Declarations..................................................... 12
Regulatory Compliance............................. 12
Other Declarations .................................... 12
© Sensormatic 2002
About this Guide
This installation guide explains how to install the
antennas and capacitor box for AMS-3000 systems
that use a Digital 216 controller. Other related
documents are:
antennas and capacitor box for AMS-3000 systems
that use a Digital 216 controller. Other related
documents are:
•
Planning Guide, 8200-0179-01
•
Installation Guide, AMS-3000 Antenna with
Ultra*Post Plus Controller, 8200-0179-03
Ultra*Post Plus Controller, 8200-0179-03
Note: Because customer requirements dictate the
placement of system components, your
Sensormatic representative will supply this
information separately.
placement of system components, your
Sensormatic representative will supply this
information separately.
About the Product
The AMS-3000 system consists of an antenna
cable, three metal extrusions to house the cable, a
capacitor (cap) box, various connecting hardware,
and a set of receiver antennas.
cable, three metal extrusions to house the cable, a
capacitor (cap) box, various connecting hardware,
and a set of receiver antennas.
Controller
Loop antenna
Cap box
Receiver
Antennas
Antennas